TAPE

Cantech 219 is a Builder's Sheathing Tape for PE Vapour Barrier and Sheathing Membrane. This tape is made of a UV resistant polypropylene film and coated with a specially formulated solvent-based acrylic adhesive. This tape has been specifically designed to seal, seam PE Vapour Barrier indoors as well as Weather Resistive Barriers (WRB) outdoors. CCMC evaluated method to seal, seam both Polyethylene Vapour Barrier film and Exterior Sheathing Membranes.

Cantech 205 is construction grade sheathing tape widely known in the Canadian Building & Construction Market for its reliability and long-lasting performance, Tuck Tape® Sheathing Tape is designed to permanently seam and seal joints of sheathing membranes. It is used to secure lap joints of building wraps while preventing air infiltration. CCMC Evaluation Report #11955-R

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

The soft PVC film coated tape is plasticized and stabilized, with a one-sided coating of rubber-based, pressure-sensitive adhesives. It is UL listed and has a matte finish, making it ideal for electrical insulation. This tape is used for joining and splicing wires and cables, with a maximum voltage of 600V or temperature of 80°C (176°F). It is suitable for all applications requiring UL listed insulating materials. The non-corrosive pressure-sensitive adhesive eliminates the need for heat, moisture, or other catalysts during application, making it safe to use with no known hazards.

Pro® 5050C EHB (Extreme High Bond) is a modified acrylic foam adhesive tape is used in many indoor and outdoor applications. Acrylic foam combines a high level of internal strength its 20 mil thickness helps adhesion to irregular surfaces. Modified acrylic adhesive bonds well to metals, glass, painted surfaces and medium/low surface energy plastics. Often replaces spot welds, rivets, nails, liquid adhesives and other permanent fasteners.

Pro® 5050C EHB (Extreme High Bond) is a modified acrylic foam adhesive tape is used in many indoor and outdoor applications. Acrylic foam combines a high level of internal strength its 20 mil thickness helps adhesion to irregular surfaces. Modified acrylic adhesive bonds well to metals, glass, painted surfaces and medium/low surface energy plastics. Often replaces spot welds, rivets, nails, liquid adhesives and other permanent fasteners.

Pro® 5050C EHB (Extreme High Bond) is a modified acrylic foam adhesive tape is used in many indoor and outdoor applications. Acrylic foam combines a high level of internal strength its 20 mil thickness helps adhesion to irregular surfaces. Modified acrylic adhesive bonds well to metals, glass, painted surfaces and medium/low surface energy plastics. Often replaces spot welds, rivets, nails, liquid adhesives and other permanent fasteners.

Polyken 296FR Flame Retardant Fiberglass Tape is ideal for a variety of applications, including cargo pit applications for freight-carrying aircraft. It is designed for challenging situations where high adhesion and flame resistance are crucial, such as seaming and repairing cargo compartment liners or covering pins and rivets. With its super high tensile strength and ability to resist flame penetration, this lightweight tape offers added safety and protection. Its conformable nature allows it to handle curves and corners with ease. The bromide-free acrylic adhesive ensures clean removal and repositioning, while also resisting flagging and lifting. This tape complies with FAR 25.853(a), 25.855(d), and 25.856(a).

3M™ Tartan™ Filament Tape 8934 is constructed on a clear polypropylene backing, reinforced with glass yarn filaments, for strapping, bundling, and reinforcing applications. It has a tensile strength of 100 lbs/in (1751 N/cm) width and a pressure-sensitive synthetic rubber adhesive offers good shear strength to fibreboard, plastics, and most metal surfaces.

3M™ Tartan™ Filament Tape 8934 is constructed on a clear polypropylene backing, reinforced with glass yarn filaments, for strapping, bundling, and reinforcing applications. It has a tensile strength of 100 lbs/in (1751 N/cm) width and a pressure-sensitive synthetic rubber adhesive offers good shear strength to fibreboard, plastics, and most metal surfaces.

3M™ Tartan™ Filament Tape 8934 is constructed on a clear polypropylene backing, reinforced with glass yarn filaments, for strapping, bundling, and reinforcing applications. It has a tensile strength of 100 lbs/in (1751 N/cm) width and a pressure-sensitive synthetic rubber adhesive offers good shear strength to fibreboard, plastics, and most metal surfaces.

3M™ Tartan™ Filament Tape 8934 is constructed on a clear polypropylene backing, reinforced with glass yarn filaments, for strapping, bundling, and reinforcing applications. It has a tensile strength of 100 lbs/in (1751 N/cm) width and a pressure-sensitive synthetic rubber adhesive offers good shear strength to fibreboard, plastics, and most metal surfaces.

tesa® 8401 is a reactive heat activated film based on phenolic resin and nitrile rubber. This amber double sided tape has no backing. It is protected by a strong paper liner and can easily be slit and die cut. At room temperature this tape is not tacky. It is activated for pre-lamination by heat and starts to become tacky at 90°C/194°F. In a second application step heat and pressure is applied over a certain period of time.

Polyken 627-35 Foilastic® Roof Flashing Tape is designed for various applications, including flashing hip, ridge, and penetration details on concrete tile roofs. It effectively seals gutters, roof valleys, eaves, chimneys, vents, and rooftop duct systems, as well as deck-to-wall joints. This tape is also suitable for sheet metal repairs on mobile homes and trailers, providing a reliable seal against water and air infiltration in other critical areas. Featuring woven polyethylene backing, it is both conformable and durable, offering excellent air and moisture barrier properties while being suitable for prolonged outdoor UV exposure for up to 3 years. The butyl rubber adhesive ensures a permanent weather-tight seal on most clean, dry surfaces, demonstrating outstanding performance across various temperatures. Additionally, it is compatible with sealants and caulking, exhibits self-healing capabilities after punctures, and, when used correctly, can help meet the requirements for EA Credit 1 (Optimize Energy Performance) under LEED®.