Products tagged with 'structural adhesive'

3M™ Scotch-Weld™ Epoxy Adhesive DP460 Part B is the second part of a two-part adhesive kit. 3M™ Scotch-Weld™ Epoxy Adhesive DP460 is a toughened, two-part epoxy adhesive with a 2:1 mix ratio. It has a 60-minute work life and reaches handling strength in approximately four hours. This adhesive exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood, and some plastics.

3M™ Scotch-Weld™ Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. Can replace mechanical fasteners, screws, rivets, and spot welds in many applications. This adhesive maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F (204.4°C) for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding.

3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is a grey structural adhesive with high overlap shear and peel strength and good impact resistance and durability. This adhesive bonds permanently to bare metals with minimal surface preparation, and also bonds to a variety of materials (especially bare metals such as aluminum, cold rolled steel, copper, brass and bronze) while resisting corrosion. Can even bond slightly oily metal with minimal to no surface preparation. It provides excellent bond strength and impact resistance, even at temperatures down to -40°F (-40°C). Ideal for industrial applications where permanent, high-strength bonds are required and helps eliminate the grinding process and surface finishing time associated with welding, spot welding and mechanical fasteners.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8805NS is a standard low-odour, non-sag, toughened two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 4-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 9 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.