Products tagged with '3M'

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS delivers long-lasting performance when bonding metal. Designed as a replacement for welding and mechanical fasteners, this non-sag adhesive delivers high-strength bonds on aluminum, cold-rolled steel, stainless steel, galvanized steel, copper, brass, and most plastics. Additionally, these bonds provide excellent durability, even in temperatures as low as -40°F (-40°C) and in powder coat and paint bake cycles up to 392°F (200°C) for 30 minutes.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8805NS is a standard low-odour, non-sag, toughened two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 4-minute work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1,000 psi (7 MPa) of overlap shear strength in about 9 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP8810NS is a low-odour, non-sag, toughened, two-part acrylic adhesive. Ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. It bonds difficult surfaces such as powder coats and most plastics. With a 10:1 mix ratio and a 10-minute work life, there's time to position substrates prior to adhesion. Once fully cured, it will reach 1,000 psi (7 MPa) of overlap shear strength in about 21 minutes, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance.

3M™ Removable Repositionable Tape 9416 is a repositionable tape with a permanent adhesive on the face side, and a removable repositionable adhesive on the back side, allowing for repositioning or multiple openings and closings. Features a light tissue carrier with permanent 3M™ Acrylic Adhesive 400 on the tight side and removable/repositionable 3M™ Repositionable Acrylic Adhesive 1000 on the easy side. This low tack repositionable adhesive allows for removal without adhesive residue from many flexible materials such as films, foils, and papers, and will not cause delamination from most paper stock.

3M™ Splicing Tape 9498 offer excellent flying splice and core starting wet grab characteristics. It is typically used in the printing industry and performs well at process speeds inexcess of 2000 feet per minute (10.16 m/s) and can be used through ovens up to 450°F (232°C) if dwell times are ten seconds or less. Provides excellent peel and shear strength – making it ideal for rigorous splicing applications and bonding plastics to metals. It features 2.0 mil high tack acrylic adhesive mounted on a tan 60 lb. densified kraft paper liner for ease in die cutting applications. For applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, signs, posters, banners, point-of-purchase displays, and more.

3M™ Adhesive Transfer Tape 9472LE is a versatile, ideal solution for applications requiring premium performance and a thicker profile than 2 mil tapes. It offers good chemical, humidity, and moisture resistance, as well as performance across a wide temperature range (from -40°F/-40°C to 300°F/148°C). Features the 3M™ Low Surface Energy Acrylic Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts.